Intel NUC Homelab - Plex, Immich, Home Assistant
from Policeshootout@lemmy.ca to selfhosted@lemmy.world on 22 Apr 13:24
https://lemmy.ca/post/42715355

I have a Synology DS923+ as my NAS which currently runs Plex, Immich and a couple other things.

I also have a Intel NUC (8th gen) which has Proxmox on it which mainly does PiHole and HomePage. I would like to use the NUC for PiHole, Immich, Plex, HomePage and Home Assistant.

Is Proxmox the best system to use for these applications? Would it be easier to just install Debian and Docker and run everything through containers on one OS instead of splitting them all up into LXC or VMs?

I would also like the convenience of easily updating containers through a GUI. I am not afraid of SSH and CLI but it’s nice to go to a browser address and see everything in one place. Kind of like how DSM7 is set up on Synology.

#selfhosted

threaded - newest

slazer2au@lemmy.world on 22 Apr 13:28 next collapse

Six one way half a dozen the other.

I personally would go down the proxmox lxc route using the Proxmox Helper Scrips the get the containers up and running.

just_another_person@lemmy.world on 22 Apr 13:30 next collapse

It’s really just personal preference, and either way is fine.

Zwuzelmaus@feddit.org on 22 Apr 13:37 next collapse

Is Proxmox the best system to use for these applications? Would it be easier to just install Debian and Docker and run everything through containers on one OS instead of splitting them all up into LXC or VMs?

Proxmox is (nearly) a class of it’s own. Yes, you need it.

You are not limited to lxc. Just run one or more of these Debians in VM’s inside, and they can docker then as needed.

Don’t forget to use the templates in Proxmox.

CmdrShepard42@lemm.ee on 22 Apr 17:23 collapse

I run everything in LXC containers because AFAIK using VMs mean you are limited on shared resources. If I want to use the iGPU for Plex and something else it would be locked to only work on the Plex VM. I mainly just have an unprivileged LXC and a second privileged LXC both running portainer that run most of my services.

bluGill@fedia.io on 22 Apr 13:50 next collapse

Since you have Proxmox why would you switch? If you don't like it, then by all means, there are lots of other options. However there is a good reason Proxmox comes up a lot. (I don't personally use Proxmox so I don't know those reasons, but the people who recommend it give every indication they are smart people who understand the problem and so I trust them enough to say it is a good option)

Best is a subjective question. There is no objective way to say what is best. We can argue about pros and cons. We can argue about what we prefer. However that is all subjective and there is no one best answer.

bluGill@fedia.io on 22 Apr 13:52 next collapse

Home Assistant insists that it must run on bare metal hardware and will not work well. This is a purely artificial limitation that home assistant puts on you. You can work around it with a lot of effort, or the limitations might not matter to you, but it is a limit to be aware of. I personally went to OpenHAB instead, but YMMV.

doeknius_gloek@discuss.tchncs.de on 22 Apr 14:01 next collapse

Uhhh, I have always used Docker for Home Assistant with no issues? That being said, I’m no HA power user at all - so maybe you could elaborate about the limits you’ve encountered?

bluGill@fedia.io on 22 Apr 15:05 collapse

https://www.home-assistant.io/installation/ Home assistant container - the version for docker - doesn't support add-ons. If you go through a lot of effort you can make it work, but you won't get help. (easiest is to install some linux in the docker and then home assistant supervised on top of that)

There is no reason HAOS couldn't run just fine in a container (qemu not docker), but they intentionally detect that and break it (I tried, I probably could make it work but I don't have that much time)

doeknius_gloek@discuss.tchncs.de on 22 Apr 15:31 next collapse

Interesting, I didn’t know that. Thanks!

tko@tkohhh.social on 22 Apr 17:09 collapse

To be fair, Addons are just other containers. If you’re using a Docker install for Home Assistant, I think the idea is you already have a handle on your docker host, and you’re capable of adding whatever other containers you might need.

bluGill@fedia.io on 22 Apr 18:14 collapse

Maybe, but the documentation says it can't be done.

note too that I wasn't running docker but instead a vm.

tko@tkohhh.social on 22 Apr 20:46 collapse

I think this is just a terminology difference. The documentation says that “Add Ons” are not supported in Container and Core, but “Add Ons” means the easy button you press to install those services. All of those Add On services are just containers that HAOS manages for you. Every single one of them can be set up as a container manually and function the same as the official “Add Ons.”

I don’t know for sure, but I wonder if the reason for this is that it’s not technically possible for a container to manage other external containers. Does anybody know about this?

bluGill@fedia.io on 22 Apr 21:10 collapse

You can run docker in docker. I do that all the time (but via scripts so I know it does docker in docker, but I don't know how they do that).

But again, I wasn't even trying to run HA in docker, I was running in a VM container and still the above is refused by default.

Bishma@discuss.tchncs.de on 22 Apr 14:18 next collapse

Not true at all. If you want to run Home Assistant on top of Home Assistant OS then it needs to be on bare metal or a full VM because its an OS. Running on HAOS is easy mode, but not required.

redlemace@lemmy.world on 24 Apr 08:06 next collapse

I never read such a thing. I never had that myself and run ha on proxmox since many years. on Debian OS on proxmox.

Coleslaw4145@lemmy.world on 24 Apr 13:12 collapse

I’ve been running Home Assistant (HAOS) on Proxmox for years with no issues. It doesn’t need to be on bare metal. VMs work fine.

Bishma@discuss.tchncs.de on 22 Apr 14:29 next collapse

I use Proxmox because its handy to be able to use both LXC containers and full VMs. I installed it as an ISO so its built on top of Debian. There are helper scripts specific to installing Home Assistant on a VM (as well as a number of other things). And the proxmox UI comes in handy.

I have Home Assistant in a VM so I can run it on top of HAOS. Then the rest of the box is set up as an unprivileged LXC where I installed docker. I run all my *ARR apps straight on my Synology (via docker) so they have fast access to my Library volume, and everything else running on the setup I just described. Then I use Portainer to maintain my containers so I can manage both the syno and proxmox docker installs from one page.

NameTaken@lemmy.world on 22 Apr 15:14 next collapse

I basically run this setup, Synology nas for storage and a nuc12 for proxmox. Things like pihole I run on both for HA. You will also have a much better experience using Plex on an Intel NUC with quick assist.

As mentioned above the helper scripts will save you a ton of time. You should definitely check them out. Proxmox allows you to easily backup and restore. So its much easier to tinker and play around without taking down the whole network.

fishynoob@infosec.pub on 22 Apr 15:50 next collapse

Run K8S on a VM on Proxmox for this stuff

possiblylinux127@lemmy.zip on 22 Apr 21:02 collapse

Kubernetes is hard and complex but if you want something flexible and scalable it is what you want.

fishynoob@infosec.pub on 22 Apr 22:35 collapse

Hey, it’s nice to talk to you. I’ve seen you around this community and I like your comments.

I said K8S because I work with it, but if OP doesn’t need HA I guess Podman is fine too. I don’t like Docker anymore after what they pulled a year or so back

possiblylinux127@lemmy.zip on 22 Apr 22:55 collapse

Docker compose is still a solid way to deploy software. Podman is cool but still fairly new.

Kubernetes is just a beast to work with. Unless you absolutely want I wouldn’t bother. K3s isn’t bad but it is painful to do anything.

fishynoob@infosec.pub on 22 Apr 23:06 collapse

It definitely takes more effort to get started

Noggog@programming.dev on 22 Apr 18:03 next collapse

Check out Komodo for doing docker UI work. Pretty new, but already awesome and making lots of progress

possiblylinux127@lemmy.zip on 22 Apr 21:02 next collapse

That’s pretty cool

Vendetta9076@sh.itjust.works on 22 Apr 22:04 collapse

This looks like an alternative to portainer or dockge. Am I correct?

Noggog@programming.dev on 22 Apr 22:37 collapse

Yeah, it’s an alt to portainer

kr0n@piefed.social on 23 Apr 09:53 next collapse

I have a DS218Play and a Intel NUC 6th gen with Proxmox.

I use my NAS as file sharing, everything else is running in Proxmox: HomeAssistant, Plex, Immich, QBitorrent, AdGuard, Frigate, ARR suite...

Policeshootout@lemmy.ca on 23 Apr 19:20 collapse

How do you find frigate with the NUC? It works pretty well?

kr0n@piefed.social on 24 Apr 10:42 collapse

It works well, but I only have one camera and I've set a low resolution stream for frigate detection.

pineapple@lemmy.ml on 23 Apr 10:32 next collapse

Proxmox definitely has a harder set-up i am currently doing it right now and I’ve found it a bit of a learning curve, but it is definitely the ultimately better and more fun option if you ask me ;)

Someone should correct me if I’m wrong but auto update should be as easy as scheduling the commands for apt or whatever package manager your using to update.

MangoPenguin@lemmy.blahaj.zone on 24 Apr 14:16 next collapse

I’d say go Debian and Docker, proxmox is nice if you’re running a lot of VMs or want HA and clustering but otherwise you don’t really need it.

If you want a GUI for docker containers there are several, Komodo or Portainer are good options.

Ohh@lemmy.ml on 24 Apr 19:03 collapse

What’s the verdict on yunohost if we are talking easy? I think so the applications being mentioned has good support on yunohost?