What's the piece that's supposed to fail first (and prevent damage) called?
from darthskull@lemmy.ca to nostupidquestions@lemmy.ca on 07 Sep 2023 19:15
https://lemmy.ca/post/4843220

The little metal pegs on a snow blower or a fuse in a circuit are examples I can think of.

#nostupidquestions

threaded - newest

W1Z_4RD@lemmy.world on 07 Sep 2023 19:16 next collapse

‘Failsafe’ the word you are looking for?

dmention7@lemm.ee on 07 Sep 2023 23:12 collapse

“Ackshyually” incoming…

Failsafe has a specific meaning, describing a system that enters an inherently safe state in the case of a failure.

For example, semi truck parking brakes are actually disengaged by applying air pressure to the system; without air pressure the brakes are engaged automatically by heavy springs. Therefore most failures in the braking system would just result in being unable to disengage the brakes, as opposed to a truck rolling away.

So, while a sacrificial component like OP is describing could be designed as part of a failsafe, generally it’s a different design principle at play.

IdiotDetector@lemmy.world on 07 Sep 2023 19:17 next collapse

Pegs on a snowblower are called shear pins.

deegeese@sopuli.xyz on 07 Sep 2023 19:24 next collapse

Sacrificial Part is the general term.

BowtiesAreCool@lemmy.world on 07 Sep 2023 21:04 next collapse

Another example would be a sacrificial piece of metal that will attract the corrosion over that of the metal of a boats prop under the waterline

ramjambamalam@lemmy.ca on 07 Sep 2023 21:12 next collapse

Sacrificial anode

Crashumbc@lemmy.world on 07 Sep 2023 21:52 collapse

Usually zinc

corsicanguppy@lemmy.ca on 08 Sep 2023 01:52 next collapse

Old beetles had some zinc under the bonnet for that, I think.

CADmonkey@lemmy.world on 08 Sep 2023 19:08 collapse

I’ve seen it on residential gas lines too.

Dagwood222@lemm.ee on 08 Sep 2023 20:15 collapse

TIL

Dellyjonut@lemmy.world on 07 Sep 2023 20:56 next collapse

In electronics it’s a breaker or a fuse

bingbong@lemmy.dbzer0.com on 07 Sep 2023 23:13 collapse

Technically just fuses are meant to be sacrificial in most cases. A breaker is more like a switch that has a special fuse for super high currents.

anton@lemmy.blahaj.zone on 07 Sep 2023 21:04 next collapse

In german its “Sollbruchstelle”, that would translate to “intended breaking point”.

[deleted] on 07 Sep 2023 23:40 next collapse
.
iconic_admin@lemmy.world on 08 Sep 2023 00:22 next collapse

I wanted to say fuse…

Fire sprinkler heads have a little glass vile filled with a glycerin based liquid holding the valve closed. When they heat up beyond a certain point, the liquid expands and bursts the vile, releasing the water from the sprinkler head. Note: only the sprinkler head exposed to the fire will dispense water, not the entire system as seen in movies. Also note: that water has been setting in an iron pipe for probably years and is absolutely disgusting.

Similarly, some commercial kitchens have a fuse-able link, which is a metal link in a chain made of some metal with a low melting point. When there’s a fire this link will melt and cause the roll up door between the kitchen and the rest of the building to slam shut.

After writing this I realize that it doesn’t necessarily answer the spirit of the question. But I guess these parts fail to protect the rest of the building, so maybe it does answer the question.

PseudoSpock@lemmy.dbzer0.com on 08 Sep 2023 00:33 next collapse

Your daddy?

cyberpunk007@lemmy.ca on 08 Sep 2023 05:06 collapse

wut?

PseudoSpock@lemmy.dbzer0.com on 08 Sep 2023 06:51 collapse

What wut? 😌

Techranger@infosec.pub on 08 Sep 2023 08:12 next collapse

Mechanical fuse. Typically composed of shear pins or can be geartrain shafts manufactured with intentionally thinner cross-sections placed at strategic points. A plastic cog in some power tools serves a similar purpose.

ReMikeAble@beehaw.org on 15 Sep 2023 02:28 collapse

At least in North America it is commonly called a shear pin